Article Nov. 21, 2018
Article Nov. 21, 2018
Production and handling
Balder is the very first field on the Norwegian continental shelf to be developed by means of a permanent, floating production vessel. The field is located in the North Sea, approximately 190 km west of Stavanger. Field development was approved by authorities in 1996 and production began in Oct 1999. Recoverable oil reserves are estimated at 170 million barrels. Current output is ~135 kbd of which ExxonMobil markets ~40 kbd.
The bulk of Balder reserves are located in license 001 (block 25/11) and ExxonMobil is operator and sole licensee. The field has an extension of approx. 6x10 km with a water depth of 127m.
Typical cargo size is 500 kb.
Load Port Data
The Balder FPSO, located approximately 190 km west of Stavanger, is a specially constructed production and storage vessel that Esso acquired from Smedvig in Nov 95. The vessel is connected to 15 producers and injectors on the seabed.
All of the 15 wells are drilled and completed using a semisubmersible drilling rig. Storage capacity on the FPU is 380,000 bbls.
Balder is a relatively heavy, naphthenic, regular sulfur crude oil similar in quality to Alba, Harding and Captain. It produces low cetane, high-density gasoil and a large resid cut.
- Gravity 26.4
- Sulfur 0.64%
- Loading Port Balder FPSO
The materials contained in this website are provided to you courtesy of ExxonMobil and are based on a range of data and information. While care has been taken in preparing the materials, ExxonMobil makes no representations, warranties or guarantees as to their accuracy, reliability, quality, correctness or completeness. Each user must make its own determination and judgment on applying any information in this assay. Any and all use of this information shall be the sole responsibility of the user, and the user releases ExxonMobil and its affiliates from any and all claims arising from its use and shall defend and hold ExxonMobil and its affiliates harmless from any third-party claims arising from the user's application or use of any part of the materials.
Crude oils Article • Sept. 17, 2019